Light interlining
- Best for
- Slim collars, younger teams, a more relaxed corporate look
- Character
- Soft and light, with a neat compact knot
- Watch out for
- Can look insubstantial under a spread collar
Bias cut, interlining and weave
A tie that twists in the hand and will not hang straight was cut at the wrong angle. It is not a wearing problem, a pressing problem or a storage problem. It was decided before the silk was sewn, and nothing fixes it afterwards.
This page covers the three things that separate a tie that holds its shape for years from one that does not. We produce custom ties in Ajman, minimum order 25 pieces, across all seven emirates.
Inside a tie
A tie sits directly under the face in every photograph your organisation takes. It is the smallest garment in the programme and the most looked at.
The thing nobody is told
Woven cloth is strong along the grain and stretchy across the diagonal. A tie needs the second of those, and cutting it that way wastes a great deal more silk, which is exactly why cheap ties are not cut that way.
Cut at 45 degrees to the grain, the silk can stretch slightly and then return. A knot pulls the cloth hard in several directions at once, and the bias lets the tie absorb that and come back to shape when it is untied.
It also lets the tie hang straight down rather than pulling to one side, because the tension is balanced across both grain directions rather than running along one.
A tie cut on the straight grain has no give. It twists as soon as it is knotted, it hangs with a visible curl to one side, and it does not recover overnight. Within a month it looks worn while the silk is still new.
There is no repair for this and pressing makes it worse. It is also the single most common complaint about bulk custom ties bought on price, and the first thing a necktie supplier should be checking on a sample.
Choosing the build
Inside a tie sits an interlining, and its weight sets how large a knot the tie makes. Nobody can change that afterwards, so it is a specification question rather than a personal preference.
Run a finger up the back seam of a tie and you will feel a loose thread with a small loop at one end. That is the slip stitch, and it is deliberate. It lets the tie lengthen slightly under the tension of a knot and pull back afterwards.
People find it, assume it is a loose thread and cut it. Once it is gone the tie cannot recover and begins to pucker along the seam. It is worth one line in a staff handover note.
A spread collar with a small knot looks empty. A narrow point collar with a heavy knot looks forced. On corporate ties these two decisions belong in the same conversation rather than being made months apart.
If the shirts are being specified at the same time, settle both together at corporate shirts and the tie build follows from the collar you choose.
Carrying the brand
A corporate tie is usually the most saturated piece of brand colour anybody in the organisation wears. How that colour gets into the silk decides how long it stays right, and any tie manufacturer should walk you through both routes rather than quoting one.
| Method | How the colour gets there | Holds up | Best for |
|---|---|---|---|
| Woven jacquard | Yarns are dyed first, then woven into the pattern | Colour runs through the cloth and does not sit on top of it | Long programmes, solid brand colours, repeat motifs |
| Printed | Ink applied to the surface of woven silk | Handles fine detail that a weave cannot reproduce | Complex artwork, gradients, short runs, event ties |
Scroll the table sideways on a phone.
The same reference that looks correct on a cotton shirt will come back more luminous on silk, because the fibre reflects far more light. It is not a mistake by the dyer. It is what silk does.
So approve the tie against the actual shirt and jacket rather than against a printed colour chip, and look at all three together under the lighting where they will be seen.
For a programme where ties are worn daily by staff who launder them at home, a quality polyester or microfibre tie resists stains better, recovers from a knot well and costs considerably less to replace.
Silk belongs on tiers where the tie is worn in front of clients and looked after. Specifying silk across a whole floor team is usually money spent where nobody notices it.
Where artwork is complex enough that a weave cannot carry it, printed custom ties are produced through our printing services on the same production schedule as the rest of the order.
Scarves and pocket squares
On a scarf and on a pocket square, the edge is the part people see closest and the part that gives away how it was made.
Hand rolled. The edge is rolled over by hand and secured with small stitches, producing a soft rounded border that sits slightly raised. It is the traditional finish and it is visible immediately at conversation distance.
Machine hemmed. Faster and considerably cheaper, with a flat edge and a visible line of stitching. Entirely acceptable on a volume programme, and it should be a decision rather than something discovered on delivery.
For a pocket square the hem matters more than anywhere else, because the folded edge is the only part on show. For a neck scarf worn knotted, the hem is mostly hidden and machine hemming is the sensible call.
Size, then fold. A pocket square needs enough body to hold a fold, which means specifying the size and the silk weight together. A square that is too small or too light collapses into the pocket within an hour and looks like it was forgotten.
Scarves carry brand colour across a larger area than any accessory here, which makes them the item most worth matching carefully and the one most often ordered last.
Before you order
None of these is about the tie itself. All five are about how it was specified.
Where accessories sit inside a wider programme of shirts, jackets and modest wear, the whole specification should live on one record with your corporate uniform details rather than being tracked per item.
Ordering
Vector artwork. We will tell you whether it can be woven or needs printing.
Spread or point. It sets the interlining weight and the knot size.
Daily floor wear or client-facing. It decides silk against polyester honestly.
Ties, scarves and squares together, so they come from one dye lot.
Questions
It was almost certainly cut on the straight grain rather than on the bias. A tie should be cut at 45 degrees across the cloth, which lets the silk stretch slightly under the tension of a knot and return to shape afterwards, and lets it hang straight because tension is balanced across both grain directions. Cutting on the bias wastes considerably more silk, which is why ties bought on price are often cut straight. There is no repair, and pressing makes it worse.
That is the slip stitch, and it is deliberate. It runs the length of the tie with a small loop at one end, and it lets the tie lengthen slightly under the tension of a knot and pull back when untied. People regularly find it, assume it is a fault and cut it. Once it is gone the tie cannot recover its shape and starts to pucker along the back seam, so it is worth mentioning in a staff handover note.
Through the interlining weight, which is specified at manufacture and cannot be changed afterwards. A light interlining gives a small compact knot that suits slim collars, a medium one fills a standard business collar and is the safe choice for mixed teams, and a seven fold construction uses the silk itself for body and gives a soft heavy knot. Match the knot to the shirt collar, because a spread collar with a small knot looks empty.
Woven jacquard where the design allows it, because the yarns are dyed before weaving so the colour runs through the cloth rather than sitting on the surface. Printed where the artwork carries fine detail or gradients that a weave cannot reproduce, and for short runs or event ties. Both are valid, and the choice should follow the artwork rather than the budget alone.
Usually not. For staff who wear a tie daily and launder at home, a quality polyester or microfibre resists stains better, recovers from a knot well and costs far less to replace. Silk belongs on tiers where the tie is worn in front of clients and looked after. Specifying silk across a whole floor team is normally money spent where nobody notices it.
Those two settle whether your custom ties are woven or printed and how heavy the interlining should be, which is most of the specification a necktie supplier needs. Order ties, scarves and squares together so they come from one dye lot. Minimum order 25 pieces.